输入这个命令输错了dd if=/sdcard/sda1 of=/dev/block/sda1
输的是dd if=/sdcard/sda1 of=/dev/block/sda，后面的1忘了输了，因为当时看错教程了，有两篇相似的教程，另一个文件是sda，没有1
现在fastboot 界面有字，没有图标了
现在在刷底包，显示的是这个
现在是这样
正在刷入 AP 系统部分 ========
==> 设置 FB 模式…
…
FAILED (remote failure)
finished. total time: 0.002s
------ 正在刷入 Logo 镜像 ------
target reported max download size of 536870912 bytes
sending ‘logo’ (3524 KB)…
OKAY [ 0.213s]
writing ‘logo’…
(bootloader) Invalid partition name logo
FAILED (remote failure)
finished. total time: 0.218s
错误：fastboot 刷入 Logo 失败！
------ 正在刷入 Boot 镜像 ------
target reported max download size of 536870912 bytes
sending ‘boot’ (23357 KB)…
OKAY [ 0.899s]
writing ‘boot’…
(bootloader) Invalid partition name boot
FAILED (remote failure)
finished. total time: 0.904s
错误：fastboot 刷入 Boot 失败！
提示：Recovery 镜像不存在。已跳过刷入…
------ 正在刷入分段的 System 镜像 ------
==> 正在刷入 System 镜像分段：system.img_sparsechunk.00
target reported max download size of 536870912 bytes
sending ‘system’ (524272 KB)…
OKAY [ 16.367s]
writing ‘system’…
(bootloader) Invalid partition name system
FAILED (remote failure)
finished. total time: 16.372s
==> 正在刷入 System 镜像分段：system.img_sparsechunk.01
target reported max download size of 536870912 bytes
sending ‘system’ (506120 KB)…
OKAY [ 15.748s]
writing ‘system’…
(bootloader) Invalid partition name system
FAILED (remote failure)
finished. total time: 910.169s
==> 正在刷入 System 镜像分段：system.img_sparsechunk.02
target reported max download size of 536870912 bytes
sending ‘system’ (523777 KB)…
OKAY [ 15.979s]
writing ‘system’…
(bootloader) Invalid partition name system
FAILED (remote failure)
finished. total time: 15.985s
==> 正在刷入 System 镜像分段：system.img_sparsechunk.03
target reported max download size of 536870912 bytes
sending ‘system’ (507849 KB)…
OKAY [ 15.470s]
writing ‘system’…
(bootloader) Invalid partition name system
FAILED (remote failure)
finished. total time: 15.474s
==> 正在刷入 System 镜像分段：system.img_sparsechunk.04
target reported max download size of 536870912 bytes
sending ‘system’ (516256 KB)…
OKAY [ 15.648s]
writing ‘system’…
(bootloader) Invalid partition name system
FAILED (remote failure)
finished. total time: 15.653s
==> 正在刷入 System 镜像分段：system.img_sparsechunk.05
target reported max download size of 536870912 bytes
sending ‘system’ (453251 KB)…
OKAY [ 13.765s]
writing ‘system’…
(bootloader) Invalid partition name system
FAILED (remote failure)
finished. total time: 13.770s
------ 正在刷入分段的 System_B 镜像 ------
==> 正在刷入 System_B 镜像分段：system_b.img_sparsechunk.00
target reported max download size of 536870912 bytes
sending ‘system_b’ (515182 KB)…
OKAY [ 15.179s]
writing ‘system_b’…
(bootloader) Invalid partition name system_b
FAILED (remote failure)
finished. total time: 15.184s
==> 正在刷入 System_B 镜像分段：system_b.img_sparsechunk.01
target reported max download size of 536870912 bytes
sending ‘system_b’ (328753 KB)…
OKAY [ 9.647s]
writing ‘system_b’…
(bootloader) Invalid partition name system_b
FAILED (remote failure)
finished. total time: 9.651s
------正在刷入完整的 Oem 镜像------
target reported max download size of 536870912 bytes
sending ‘oem’ (384560 KB)…
OKAY [ 12.912s]
writing ‘oem’…
(bootloader) Invalid partition name oem
FAILED (remote failure)
finished. total time: 12.916s
提示：完整或分段的 Oem_B 镜像不存在，已跳过刷入…
提示：完整或分段的 Vendor 镜像不存在，已跳过刷入…
==> 清除 FB 模式…
…
FAILED (remote failure)
finished. total time: 0.002s
AP 系统部分刷入完成。
请按任意键返回主菜单。
图片看不清，我手打了
failed to boot linux, falling back to fastboot
fastboot reason: fall-through from normal boot mode
现在用了RSD，显示设备没有切换到FASTBOOT模式，但是设备确实在这个页面
关机，重新开机 ，再刷官方固件即可。
就是再刷官方底包， [XT1789-03 Sprint 定制版 OCX27.109-48-11 官方固件]
用大佬你的刷底包工具刷不进去，RSD也刷不进去，显示没有切换到fastboot模式，但我就是在start哪个界面
现在准备用另一台电脑试试刷底包，或者用blankflash了
此贴终结，救活了，最后选择5全部刷入就可以了
，以前都是输入1，2的
兄嘚我也这样了，怎么办