解决RSD识别不到端口和刷底包报错问题
使用方法:
1.将底包完全解压。
2.将脚本解压到一起
机器进入fastboot，参考：Moto X 进入 Fastboot 模式的方法（通用教程帖）https://bbs.ixmoe.com/t/moto-x-fastboot/17259/1
(出处: 汐梦社区)
3.双击执行解压出来的 一键刷入底包.bat一键刷入底包.zip (747 KB)
源码：
fastboot -w
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot reboot-bootloader
ping 127.1 -n 10 > nul
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot reboot
ps：此脚本无论5.11 6.0 XT1575 XT1570通用，因system分段数目不一样所报的错误请无视